viii
For safe operation
Pictorial signs
Pictorial signs are used in this Operation Manual for safe operation of and in prevention of damages to the
device. Pictorial signs and their meanings are given below. Read and fully understand before reading the text.
Example of pictorial signs
Indicates the case where it is assumed that misuse of the machine, ignoring this sign, as this may
cause fire or poisoning. Be sure to read this manual for proper operation.
Indicates the case where it is assumed that misuse of the machine, ignoring this sign, can cause
damage only to property.
This symbol indicates that the information is helpful in proper operation of the plotter.
The symbol indicates helpful information that will facilitate the use of the device.
Indicates the reference page for related contents.
The symbol “ indicates the case where some phenomenon that requires a CAUTION sign
(including "DANGER" and "WARNING" signs) exists. A concrete precaution (precaution against
an electric shock in the case of the sketch given on the left) is shown in the illustration.
The symbol “ " indicates a prohibited behavior. A concrete illustration of prohibition
(disassembly is prohibited in the sketch given on the left) is shown in or next to the illustration.
The symbol “ " indicates a thing that is forced to be done and instruction that is forced to be
followed. A concrete illustration of instruction (the removal of a plug from the receptacle is
instructed in the sketch given on the left) is drawn in the illustration.
To Next Page
Loading...
Need help?
General