4-33
4
Maintenance
Replacing the UV LED Unit filter
To use for a long time, clean the UV LED Unit filter periodically (once around two weeks).
1
Turn the power off.
2
Turn the main power switch located on the left of the main unit off.
3
Open the right maintenance cover.
• Remove the screws (2 pcs) and open the right maintenance
cover.
4
Remove the filter holder.
• Remove the finger screw to remove the filter holder.
• When cleaning, be sure to wear the supplied goggles and gloves since you may get ink in your eyes.
• Contact a shop or a sales office when a screw is dropped in cleaning of the filter.
• Do not remove the unspecified parts.
Articles required for
cleaning
• Alcohol • Gloves • Paper towel
• Goggles • Filter
*1
*1. The attached filter is 40 pieces.
Please contact your dealer or our office to purchase the filter (part number: SPC-0575)
Filter holderFilter holder
• On the picture above, covers are removed
for illustrative purposes.
To Next Page
Loading...
