MIMAKI JFX-1631/1615 - Page 127

Before taking a phenomenon as a trouble
5-5
5
In Case of Trouble
11
Press the key.
• The weight checking screen is displayed. If you entered a wrong
weight, press the key and perform the procedures from the
Step 8 again.
12
Register the weight by pressing the key.
13
Press the key several times to end the setting.
• You can correct the ink remaining amount value up to 15 times per cartridge.
If you try to correct 16 times and more, “Preservation Failure” is displayed and you cannot save it.
InkLevelSet Slot 3 C
410 g OK ?
ENTER
END
ENTER
END