MIMAKI JFX-1631/1615 - CHAPTER 2 Basic Operations

The procedure from preparation of ink and media to the execution
of drawing, and setting methods are explained.
How to use the opening/closing door................................ 2-2
Operation flow...................................................................... 2-3
Turning the power ON ......................................................... 2-4
Setting the media ................................................................. 2-5
Setting the media ........................................................................2-5
Test drawing......................................................................... 2-7
Execution of test drawing ............................................................2-7
Execution of head cleaning ................................................ 2-8
When cleaning with “Normal” or “Hard” or “SUBTANK
MAINTE” .....................................................................................2-8
When cleaning with “Wiping” ......................................................2-9
Cleaning automatically when turning the power on ..................2-10
Drawing an image from source data ................................ 2-11
Starting the drawing operation ..................................................2-11
Interruption of drawing ..............................................................2-12
Move the Y-bar .........................................................................2-13
Turning the power OFF ..................................................... 2-14
Preventing nozzle drop out while power-off ..............................2-14
CHAPTER 2
Basic Operations