MIMAKI JFX-1631/1615 - Page 36

Setting the media
2-6
On the absorption area
The absorption area of JFX-1631/1615 is shown in the following figure. Pressing key, set the optimum
absorption area for the media to be set.
• When changing the point of origin, please refer to P.3-2 .
ON/OFF
775 mm
1550 mm
2325 mm
3100 mm
Origin
Seal indicating the point of origin
Provided at the 4 corners of the table.
JFX-1631/JFX-1631plus
775 mm
1550 mm
Origin
Seal indicating the point of origin
Provided at the 4 corners of the table.
JFX-1615/JFX-1615plus