MIMAKI JFX-1631/1615 - CHAPTER 3 Useful Function

This chapter describes the setting procedures of each functions,
and how to operate the plotter usefully.
Changing origin................................... 3-2
Changing origin with JOG keys ............... 3-2
Changing origin with FUNCTION menu .. 3-3
Registering the thickness of
the media.............................................. 3-4
Register the thickness of the media
manually .................................................. 3-4
Adjust head gap with the or
keys ...........................................3-4
Measuring the thickness of the media
automatically ........................................... 3-5
Registering Head gap value ............... 3-6
Other useful functions ........................ 3-7
Data clear ................................................ 3-7
Displaying information of this device ....... 3-7
Each setting ......................................... 3-8
Setting the print method ..........................3-8
Setting the light intensity of
the UV LED ........................................... 3-10
Setting of priority ................................... 3-11
Setting the work change ........................ 3-12
Changing language display on
the screen .............................................. 3-13
Output the setting list ............................ 3-14
Displaying machine information of
this device ............................................. 3-15
Other useful settings ............................. 3-16
Initializing set contents .......................... 3-17
For setting media correctly.............. 3-18
Adjust the height of the Post
Cure Unit............................................ 3-19
Use the Post Cure Unit ..................... 3-21
Note when using Post Cure Unit ........... 3-21
Note when drawing on thick media ....... 3-22
Turn on the power supply of the
Post Cure Unit ....................................... 3-23
Switch the drawing range when using
the post cure function ............................ 3-24
Select the use method of the Post
Cure Unit (setting secondary curing) ..... 3-25
Enlarge the irradiation area of the
post cure ............................................... 3-28
Re-irradiate lamp light on the drawn media .
3-30
About time to replace lamp.............. 3-32
Note for using post cure unit........... 3-37
UP
DOWN
CHAPTER 3
Useful Function