3-9
Each setting
3
Useful Function
Item Value Outline
QUALITY STANDARD Standard drawing quality
FINE High quality drawing (drawing speed is slower)
FAST High speed drawing (quality is inferior)
SCAN DIR BI-DIR Drawing is conducted in both directions when the head moves on the media at
drawing.
(Quicker drawing compared to “UNI-DIRN” )
UNI-DIR Drawing is conducted in one direction when the head moves on the media at
drawing. (Higher quality drawing.)
UNI-DIR CH2 When drawing is conducted, only the right-hand side UV LED is used.
LOGICAL
Seek
ON The head moves according to the data width to be drawn.
MEDIA The head moves over the set media width at drawing.
OFF The head moves whole table width at drawing.
• When you draw using the RIP software “RasterLinkPro5” from the connected host PC, the value set
here becomes valid only for “Logical seek”. For other settings (QUALITY and SCAN DIR.), drawing is
performed according to the setting value in the RasterLinkPro5.
To Next Page
Loading...
