3-33
About time to replace lamp
3
Useful Function
6
Open the open/ close door of the Y bar front
surface, and loosen the screws on both sides of
the Post Cure Unit.
7
Move the Post Cure Unit to the top, and tighten the screw.
8
Remove the lamp side cover (L/R).
9
Remove the socket cover of both sides of the
lamp.
10
Slide the protection cover.
• Tighten the screw securely. If replacing the lamp with the screw loosened, the Post Cure
Unit may fall during replacing and get your hand stuck or break the lamp.
To Next Page
Loading...
