BeneVision N1 Patient Monitor Operator’s Manual 1 - 3
• Put the equipment in a location where it can be easily viewed and operated.
• The equipment uses a mains plug as isolation means to the mains power. Do not locate the
equipment in a place difficult to access the mains plug.
• During normal use, the operator is expected to face the front of the equipment.
• Remove the battery before shipping the monitor or if it will not be used for an extended period of
time.
• Remove the battery before transporting the equipment or if the equipment will not be used for a
long time.
• The software was developed in compliance with IEC62304, to minimize the possibility of hazards
arising from software errors.
• This manual describes all available features and options. The equipment configuration may not have
all of them.
• Observance of this manual is a prerequisite for proper product performance and correct operation
and ensures patient and operator safety.
• Keep this manual in the vicinity of the equipment so that it can be referenced when needed.
1.2 Equipment Symbols
Symbol Description Symbol Description
General warning sign Refer to instruction manual/booklet
Serial number Catalogue number
Date of manufacture Manufacturer
USB connector Protected against vertically falling water
drops per IEC 60529
IP44:
protected against ingress of foreign
objects no less than 1.0 mm, and against
access to hazardous parts with wire;
protect against harmful effects of
splashing water
IP22: protected against ingress of foreign
objects no less than 12.5 mm and
against access to hazardous parts with
finger; protected against harmful effects
of vertically falling water drops with the
device tilted at any angle up to 15°
Battery indicator Computer network
Direct current Alternating current
DEFIBRILLATION-PROOF TYPE CF APPLIED
PART
DEFIBRILLATION-PROOF TYPE BF APPLIED
PART
Lock; tighten IBP zero key
To Next Page
Loading...
Need help?
General
