Mindray BeneVision N1

5 - 4 BeneVision N1 Patient Monitor Operator’s Manual
■ Select the Patient Management quick key → Discharge Patient (only available when the N1is used with
the independent external display).
■ Select the Main Menu quick key → from the Patient Management column select Discharge.
Select a button in the Discharge Patient dialog:
■ Print End Case Report: prints the end case report when the patient is discharged.
■ Discharge: clears the waveform data of the current patient. The monitor loads the default configuration
and goes to the standby mode. The current patient becomes a discharged patient.
■ Clear Patient Data: discharges the current patient and clears the waveform data. The monitor still uses the
current configuration and does not go to the standby mode. The current patient becomes a discharged
patient.