12-6
parameter tile has a value. To calculate a score, follow this procedure:
1. Start monitoring parameters. Their values are automatically obtained.
2. Manually input the values for the parameters that are not monitored.
NOTE
If the value is measured by the monitor, the value displays in grey. You cannot
manually input the value.
When you are in the scoring screen, if an alarm for the monitoring parameter
occurs, the alarm indicators still can be seen in the monitor display.
The parameter input range is as follows:
Parameter Range
Pulse Rate 20 bpm -300 bpm
Systolic NIBP 40 mmHg -270 mmHg (Adult)
40 mmHg -200 mmHg (Pediatric)
40 mmHg -135 mmHg (Neonate)
Respiration Rate 0-150 rpm
Temperature 0.1°C --- 50.0°C (32.1°F --- 122.0°F)
Level of Consciousness AVPU: Alert, Reacting to Voice, Reacting to Pain,
Unresponsive
GCS: 1-15
Supplemental Oxygen Yes, No
SpO2 0% --- 100%
Urine Output 0 -300 mml/h (0 --- 10 ml/h/kg)
Catheter Yes, No
Blood Sugar 1.0 mg/dl -720.0 mg/dl (0.06 mmol/L -40.00 mmol/L)
Pain Score 0-10
Pain None, Mild, Moderate, Severe
Inspired O2% 21% -100%
Airway Clear, Obstruction
Customizable parameter The input range depends on the decimal point. The decimal
point is customizable in Mindray Clinical Scoring Config Tool.
0 --- 9999 (decimal point as 1)
0.0 --- 999.9 (decimal point as 0.1)
0.00 --- 99.99 (decimal point as 0.01)
To Next Page
Loading...
