Mindray VS-900 - Setting the Recorder; Starting and Stopping Recordings

13-2
CAUTION
 Use only specified thermal paper. Otherwise, it may cause damage to the
recorder’s printhead, the recorder may be unable to print, or poor print quality
may result.
 Never pull the recorder paper with force when a recording is in process.
Otherwise, it may cause damage to the recorder.
 Do not leave the recorder door open unless you are replacing the recorder
paper or removing a fault.
13.3 Setting the Recorder
Select [Main]→[General Setup >>]→[Print Setup >>] to access the [Print Setup] menu
and select the items as you want.
13.4 Starting and Stopping Recordings
To manually start a recording, you can either:
 Press hardkey on the recorder.
 Select [
Record] key in graphic or tabular trend.
The monitor will automatically start recording when the [Save] QuickKey is selected to
save the manual input patient data if [Automatically Record on Manual Save] is enabled
from the [User Settings>>] menu.
To manually stop the current recording, you select hardkey.
Recordings stop automatically when:
 A recording is completed.
Paper roll