Mindray VS-900 - Notes

1-4
1.1.3 Notes
NOTE
 Put the equipment in a location where you can easily view and operate the
equipment.Keep this manual in the vicinity of the equipment so that it can be
obtained conveniently when needed.
 The software was developed in compliance with IEC60601-1. The possibility of
hazards arising from software errors is minimized.
 This manual describes all features and options. Your equipment may not have
all of them.
 During normal use, the operator is expected to face the front of the equipment.
 The equipment uses a mains plug as a means of isolation to the mains power
supply. Do not position the equipment in a place difficult to access the mains
plug.
 Only the central monitoring system with a software version 06.08.00 or greater,
or the eGateway with a software version 5.0 or greater, supports VS-900
monitor.