A-3
Shutdown delay At least 20 minutes (after a low battery alarm first occurs)
Battery (Optional)
Battery Type LI23S002A, Chargeable Lithium-Ion
Voltage 11.1 VDC
Capacity 4500 mAh
Run time
At least 8 hours when powered by a new fully-charged
battery at 25°C±5°C with SpO
2
cable connected, and auto
NIBP measurements at an interval of 15 minutes.
Charge time
Monitor power off: less than 5.5 hours to 90%; less than 6.5
hours to 100%.
Monitor power on: less than 10.5 hours to 90%; less than 11.5
hours to 100%.
Shutdown delay At least 20 minutes (after a low battery alarm first occurs)
A.4 Physical Specifications
Size
178mm×150mm×260mm
Weight ≤2.5 kg (with SpO
2
module, NIBP module, recorder module and
a battery)
A.5 Hardware Specifications
A.5.1 Display
Screen type Color TFT LCD
Screen Size (diagonal) 8.4’’
Resolution 800×600 pixels
A.5.2 Recorder
Method Thermal dot array
Paper speed 25 mm/s
Number of waveform
channels
1
A.5.3 LEDs
Alarm lamp 1 (two color coded: yellow and red)
Power on LED 1 (green)
To Next Page
Loading...
