4-10
Select [Zoom] to set the time length of the trend displayed on the screen.
Select [
Scroll] and control or key to move the cursor. Select or
to move the cursor to the previous or next page.
Select [
Event] and control or key to quickly locate the event.
Select [
Print] to print the selected patient’s graphic trend data currently on the
screen.
NOTE
Pausing or switching off alarms will not be recorded as events. The time of these
operations will not be recorded in the system log.
A total loss of power has no impact on the saved events.
Events recorded earlier might be overwritten by later ones if the storage
memory reaches capacity.
4.5 Transferring Data from the Monitor to USB Drive
1. Insert a USB drive to the USB connector on the monitor.
2. Select [Main]→[Maintenance >>]→[User Settings >>]→enter the required
password→select [Ok] to access [User Settings] menu.
3. Select [Transfer Data to USB].
4. Select [Period] and select your desired time.
5. Select [Transfer Data].
CAUTION
The USB drive you use may have write-protect function. In this case, please
make sure the USB drive for data transfer is in read/write mode.
Do not remove the storage medium during data transfer process. Otherwise,
data files may be damaged.
The normal monitoring function will be affected during data export. Do not
perform any monitoring activity during data export.
To Next Page
Loading...
