Mindray VS-900 - Configuring Measurement Colors; Setting the Date and Time; Configuring Unit; Configuring Printout

3-9
3.5.10 Configuring Measurement Colors
You can set the desired color for the parameters.
Select [Main]→[General Setup>>]→ [Parameter Color Setup>>] and then the [Color
Setup] menu pops up.
3.5.11 Setting the Date and Time
1. Select [Main]→[General Setup>>]→[System Time>>].
2. Set [Date] and [Time].
3. Select [Date Format] and toggle between [yyyy-mm-dd], [mm-dd-yyyy] and
[dd-mm-yyyy].
4. Select [Time Format] and toggle between [24h] and [12h].
CAUTION
 Changing date and time affects the storage of trends and events and may cause
data missing.
3.5.12 Configuring Unit
To enter the [Unit Setup] menu, select [Main]→[General Setup>>]→[Unit Setup>>].
3.5.13 Configuring Printout
You can select the items to be printed on the strip. By default, all items are selected.
To enter the [Print Setup] menu, select [Main]→[General Setup>>]→[Print Setup>>]
and then pops up.