3-2
3.1.1 Unpacking and Checking
Before unpacking, examine the packing case carefully for signs of damage. If any damage
is detected, contact the carrier or us.
If the packing case is intact, open the package and remove the equipment and
accessories carefully. Check all materials against the packing list and check for any
mechanical damage. Contact us in case of any problem.
WARNING
When disposing of the packaging material, be sure to observe the applicable
waste control regulations and keep it out of children’s reach.
The equipment might be contaminated during storage and transport. Before
use, please verify whether the packages are intact, especially the packages of
single use accessories. In case of any damage, do not apply it to patients.
NOTE
Save the packing case and packaging material as they can be used if the
equipment must be reshipped.
3.1.2 Environmental Requirements
The equipment is suitable for use within the patient environment.
The operating environment of the equipment must meet the requirements specified in
this manual.
The environment where the equipment is used shall be reasonably free from noises,
vibration, dust, corrosive, flammable and explosive substances. If the equipment is
installed in a cabinet, sufficient space in front and behind shall be left for convenient
operation, maintenance and repair. Moreover, to maintain good ventilation, the
equipment shall be at least 2 inches (5 cm) away from around the cabinet.
When the equipment is moved from one place to another, condensation may occur as a
result of temperature or humidity difference. In this case, never start the system before
the condensation disappears.
WARNING
Make sure that the operating environment of the equipment meets the specific
requirements. Otherwise unexpected consequences, e.g. damage to the
equipment, could result.
To Next Page
Loading...
