3-1
3 Basic Operations
3.1 Installation
WARNING
The equipment shall be installed by personnel authorized by us.
Do not open the equipment housings. All servicing and future upgrades must
be carried out by the personnel trained and authorized by our company only.
The software copyright of the equipment is solely owned by us. No organization
or individual shall resort to juggling, copying, or exchanging it or to any other
infringement on it in any form or by any means without due permission.
Devices connected to the equipment must meet the requirements of the
applicable IEC standards (e.g. IEC 60950 safety standards for information
technology equipment and IEC 60601-1 safety standards for medical electrical
equipment). The system configuration must meet the requirements of the IEC
60601-1 medical electrical systems standard. Any personnel who connect
devices to the equipment’s signal input/output port is responsible for providing
evidence that the safety certification of the devices has been performed in
accordance to the IEC 60601-1. If you have any question, please contact us.
If it is not evident from the equipment specifications whether a particular
combination with other devices is hazardous, for example, due to summation of
leakage currents, please consult the manufacturers or else an expert in the
field, to ensure the necessary safety of patients and all devices concerned will
not be impaired by the proposed combination.
To Next Page
Loading...
