2-1 
2 The Basics 
 
 
2.1 Intended Use 
The Monitor is intended for monitoring physiologic parameters, including SpO
2
, PR, NIBP, 
TEMP, and CO
2
 on adult, pediatric, and neonatal patients in healthcare facilities by clinical 
physicians or appropriate medical staff under the direction of physicians. 
 
WARNING 
  This equipment is intended for use only by clinical professionals or under their 
guidance. It must only be used by persons who have received adequate training 
in its use. Anyone unauthorized or untrained must not perform any operation 
on it. 
 
 
2.2 Applied Parts 
The applied parts of the monitor include followings: 
  SpO
2
 sensor and cable 
  NIBP tubing and cuff 
  Temp probes and cable 
  CO
2
 sample line