Mindray VS-900 - Manually Input Patient Data

4-5
 Input [Department] name, and then the system will search the patient within
the department.
 Input [MRN], and then the system will search the patient according to the input
medical record number.
 Input [Last Name] and/or [First Name], and the system will search patient upon
the name.
4. Select the page key (for example, ), and then use up or down arrow
beside the key to turn to another page, or select [Scroll] key and then use up or
down arrow beside the key to select the desired patient.
5. Select [Admit] to access [Patient Demographics] menu.
6. Select [Ok]. If necessary, you can modify patient information and then select [Ok].
4.2 Manually Input Patient Data
You can choose whether to display the manual input area on the screen and configure the
items to be displayed in the manual input area:
1. Select [Main]→[Maintenance >>]→[User Settings >>]→enter the required
password→Select [Ok] to access [User Settings] menu.
2. Select [Manual Inputs>>].
3. In the [Manual Inputs Setup] menu, you can
 Configure the items to be displayed in the manual input area.
 Select [Manual Input Area] and toggle between [On] and [Off] to display or
hide the manual input area.
4. Select to save the configuration and exit the menu.
The following picture shows the manual input area which is located at the bottom of the
screen if displayed.