A-2
Item Operating conditions Storage conditions
Temperature 16ºC to 33 ºC (60.8ºF to 91.4 ºF) -25 to 55ºC (-13ºF to 131ºF)
Relative humidity
(non-condensing)
10% to 95% up to 95%
WARNING
The equipment may not meet the performance specifications if stored or used
outside the specified temperature and humidity ranges.
NOTE
The environmental specifications of unspecified parameters are the same as
those of the main unit.
A.3 Power Supply Specifications
AC Power
Line voltage 100 to 240 VAC ~ (±10%)
Current 0.9 to 0.5A
Frequency
50/60 Hz (±3Hz)
Fuse T2AL-250V
Battery
Battery (Standard)
Battery Type LI13I001A, Chargeable Lithium-Ion
Voltage 11.1 VDC
Capacity 2600 mAh
Run time
At least 3 hours when powered by a new fully-charged
battery at 25°C ±5°C with SpO
2
cable connected, and auto
NIBP measurements at an interval of 15 minutes.
Charge time
Monitor power off: less than 3 hours to 90%; less than 4 hours
to 100%.
Monitor power on: less than 6 hours to 90%; less than 7.5
hours to 100%.
To Next Page
Loading...
