10-6
To connect the ear thermometer to the monitor:
1. With the arrow-marked side of the plug face up, insert the plug into the ear
thermometer connector.
2. Lock the plug by turning the plug.
3. Place the ear thermometer on the dock.
10.2.1.2 Installing a Probe Cover Package
To install the probe cover package into the temperature dock:
1. Remove the ear thermometer from the dock.
2. Remove the probe cover loader by pressing the button on the right side of the dock
and moving the loader forwards.
3. Rotate the loader cap counterclockwise, and then lift the cap.
To Next Page
Loading...
