ZS3 Service Manual Page 206 of 295
RCV_VSUPR over warning
Temperature Limit
"System Overheat
Warning: Finish exam and
shutdown."
Multiple Sensors over
warning Temperature Limit
"System Overheat
Warning: Finish exam and
shutdown."
"MTP can't connect.
Please disconnect and
reconnect."
MPP can't connect. Voltage
Error
"MTP can't connect.
Please disconnect and
reconnect."
CWBoard Current or Voltage
Error
"CW Error. Please
disconnect and reconnect
MTP."
Watchdog Server: Task Not
Responding
"Internal System Error
has occurred."
Failed to configure FPGAs);
"Internal System Error
has occurred."
Fatal Error due to
NVASSERT. See above
NVASSERT log statement
for details
"Internal System Error
has occurred."
PIC is Invalid, No HV support
"Internal System Error
has occurred."
HV's not the same when
attempting dynamic update
of limits
"Internal System Error
has occurred."
Failed to reset the PIC HV
task
"Internal System Error
has occurred."
Failed to set HV limits to PIC
"Internal System Error
has occurred."
Failed to set QDAC voltage
to target
"Internal System Error
has occurred."
Can't Read voltage from PIC
"Internal System Error
has occurred."
High Voltage not dumped
prior to power up
"Internal System Error
has occurred."
"Internal System Error
has occurred."
"Internal System Error
has occurred."
PIC version is invalid, No HV
support
"Internal System Error
has occurred."