Deleting a User
Turn on the access control function and log in to the system as Administrator before you
delete the user.
1. Open the “Access Control” page using the path: [Setup] [System] [Security].
2. Select the user to be deleted in the User List. Click [Delete] to delete the selected
user.
Editing privilege
Turn on the access control function and log in to the system as Administrator before you
edit privileges.
1. Open the “Access Control” page using the path: [Setup] [System] [Security].
2. Select a user, click [Edit Privilege] to enter the "Edit user privilege" dialog box, and
select or deselect the check box from the privilege list.
3. Click [OK] to confirm the editing and exit the dialog box. The edited privileges will
appear in the User List.
Modify Passwords
The system administrator can modify all user passwords. The administrator password is
empty by factory default. You can set this password.
An operator can only modify his/her own password. There are two ways to modify
passwords: on the “Security” page or in the “Manage Session” dialog box.
“Security” page (administrators can modify the password)
1. Open the “Security”” page using the path: [Setup] [System] [Security].
2. Select the user name to be modified in User List. Click [Change Password] to open
the dialog box.
To Next Page
Loading...
Need help?
General
