Range: 0-9. Number of retries, if it fails to send DICOM task
to the server. The number of retry attempts can be set here.
Refers to timeout during association establishment.
Transport Layer Security. Select whether to encrypt the data
during network transportation.
Refer to copies of printed files. You can select among 1
through 5, or directly enter the numeral.
The system supports RGB (color printing) and
MONOCHROME2 (black and white printing). Please select
the type the printer supports.
Select between LANDSCAPE and PORTRAIT.
Specify printing task priority among HIGH, MED and LOW.
Select film size among the selections listed in the drop-down
list.
Specify quantity of printed files, e.g. STANDARD\2, 3
indicates 6 images are printed for each page.
Specify print medium: Paper, Clear Film, Blue Film; select
Blue Film or Clear Film for black and white printing; select
Paper for color printing.
Specify whether you want a trim box to be printed around
each image on the film: Yes or No.
Enter configuration information in the field.
Enter the minimum density of the film.
Enter the maximum density of the film.
Specify where the file is exposed: MAGAZINE (stored in the
magazine), or, PROCESSOR (exposed in the processor).
Select how the printer magnifies an image to fit the film.
Replicate: interpolated pixels belong to duplicate of adjacent
pixels);
Bilinear: interpolated pixels are generated from bilinear
interpolations between adjacent pixels;
Cubic: interpolated pixels are generated from cubic
interpolations between adjacent pixels;
None: without interpolation.
Adds the DICOM service to the service list
Click to cancel parameter preset.
Select an item in the service list, change the parameters in
the above area, and click [Update] to update the item in the
service list.
To Next Page
Loading...
Need help?
General
