Minebea Intec PR 5220 Series - Parameters for Serial Interface

7.13.2 Parameters for serial interface
1. Select -[Serial ports parameter]- [xBPI-Port] and conrm.
The following window opens:
2. Select the desired interface and conrm.
3. Press the [Param] softkey.
The following window opens:
4. If necessary, change the parameters. Only the "baudrate" and "stop bits" can be set
for an xBPI scale.
5. Press to exit the menu and to save the settings.
7 Commissioning Transmitter Series PR 5220
EN-97 Minebea Intec