Minebea Intec PR 5220 Series - Fieldbus Parameters

Save the data with [Yes].
Press [No] to exit the menu without changing data.
7.15.3 Fieldbus parameters
The eldbus parameters are set under this menu item.
Open the menu via -[Fieldbus parameter].
This menu item can only be selected for the devices PR 5220/01, PR 5220/04, PR 5220/
06 and PR 5220/07.
The protocol displayed automatically depends on the device version :
- [ProBus-DP] for PR 5220/01
- [InterBus-S] for
- [DeviceNet] for PR 5220/04
- [ProNet I/O] for PR 5220/06
- [EtherNet-IP] for PR 5220/07
Example:
PR 5220/06 ProNet I/O
Note:
The individual parameters depend on the eldbus type.
Transmitter Series PR 5220 7 Commissioning
Minebea Intec EN-132