Minebea Intec PR 5220 Series - Calibrating with Load Cell Data (Smart Calibration)

Example:
- 1 load cell with nominal characteristic value C
n
= 2 mV/V
- at maximum capacity of 2000 kg
- Maximum load 1000 kg
- Dead load 500 kg
- Load cell supply voltage 12 V DC
7.12.9 Calibrating with load cell data (smart calibration)
If the scale is not used in legal metrology, calibration without weights can be performed.
The easiest method is the one using load cell data without calculation.
1. Press the [by data] softkey.
Transmitter Series PR 5220 7 Commissioning
Minebea Intec EN-84