Minebea Intec PR 5220 Series - Selecting and Configuring Serial Interfaces

- Conguring digital inputs and outputs [Digital i/o parameter]
Note:
This menu item is only available if under -[Operating parameter]- [Application]
"Standard" has been selected.
- Conguring analog output [Analog output parameter]
7.15.1 Selecting and conguring serial interfaces
The interfaces are congured under this menu item.
7.15.1.1 Remote display protocol
Select - [Serial ports parameter] and conrm.
The following window opens.
7 Commissioning Transmitter Series PR 5220
EN-125 Minebea Intec