Minebea Intec PR 5220 Series User Manual

16.2 Weight error status
LED Error 1
Arithmetic
Error 7
(negative)
Error 2
Overload
Error 3
(>36 mV)
Error 6
Sense monitoring
Error 9
Communication
Flash. 1Hz Flash. 1Hz Altern. ash. 1Hz Altern. ash. 1Hz
Flash. 1Hz Flash. 1Hz Altern. ash. 1Hz
Flash. 1Hz Flash. 1Hz Flash. 1Hz Flash. 1Hz Altern. ash. 1Hz Altern. ash. 1Hz
Note:
VNC text, see also Chapter 16.1.
Note:
With all other messages, the upper status indicator LED blinks.
16.3 Error messages for xBPI scales
VNC text Error and possible cause Remote dis-
play
Ext. meas. device error No weight values can be read from scale:
- Scale error
Error 3
Value exceeds display The weight value is not displayed:
- Too many digits have been set.
Error 4
No values from scale No communication with xBPI scale:
- Cable break.
- Internal scale error.
- The scale is not connected to the power supply.
Error 9
No weight data The weight value is not displayed:
- Another weighing point was selected.
Press to assign the new weighing point to the device.
Error •
Transmitter Series PR 5220 16 Error messages
Minebea Intec EN-220

Minebea Intec PR 5220 Series Specifications

General

Brand	Minebea Intec
Model	PR 5220 Series
Category	Transmitter
Language	English