Minebea Intec PR 5220 Series - Page 105

— 4 digits
— 8 digits
— Stability symb.delay
— no delay
— short delay
— long delay
— extrem long delay
— Tare parameter
— at any time
— not until stable
— Auto zero function
— Auto Zero on
— Auto Zero o
— Adjustment function
— ext.adj.w.fact.wt.
— ext.adj.w.user.wt.
— ext.adj.w.pres.wt.
— internal adjust
— ext.lin.w.fact.wt.
— ext.lin.w.pres.wt.
— Conrm preload
— Delete preload
— adjust disabled
— Conrming adjust.
— automatically
— manual
— Zero range
— 1% of max load
— 2% of max load
— 5% of max load
— 10% of max load
— Power-On zero range
— factory settings
— 2% of max load
— 5% of max load
— 10% of max load
— Power-On tare/zero
— active
— inactive
— only for zeroing
— Measure rate
— normal output
— fast output
— Calibration check
— O
— Calibration prompt
— External adjustment
— Accessible
— Blocked
— Maximum capacity
— reduced by preload
— constant
Transmitter Series PR 5220 7 Commissioning
Minebea Intec EN-102