Minebea Intec PR 5220 Series - Page 228

Number Display Cause
16 Cannot write to ea-
rom
Error when writing a material entry to the hard drive memory (EA-
ROM) → hardware error
17 Action not allowed Fieldbus action is not permitted.
Example: Starting lling during an ongoing lling process or star-
ting lling when querying the system setup.
18 Weight unit of mate-
rial invalid
The unit of the weighing point does not match the unit of the ma-
terial.
16 Error messages Transmitter Series PR 5220
EN-225 Minebea Intec