Minebea Intec PR 5220 Series - Page 56

Specications
Description Data
Transmission rate 10 Mbit/s and 100 Mbit/s
Autodetection (10/100, HalfDX/FullDX)
Protocol EtherNet IP
Connection mode Network
Conguration EDS le "sag_5220_ethernetip.eds"
Potential isolation yes
Cable type Twisted pairs, screened, e.g. patch cable CAT5 Autolink (stra-
ight or crossover)
Cable impedance
150 
Cable length to HUB max. 115 m
Certicate ODVA for HMS Industrial Networks AB
- Product code: 99
- Product name: Anybus-CC 40 EtherNet/IP
- SOC le name: ABCC40-EIP-2P.stc 15.05.2014
Note:
The IP address and the subnet mask are set at - [Fieldbus parameter] (see also
Chapters 7.15.3 and 12.2).
The EDS le is stored on the CD supplied with the device (eldbus directory of the
respective device). The current le is also available for download via the Internet.
http://www.minebea-intec.com
4 Device installation Transmitter Series PR 5220
EN-53 Minebea Intec