25
MANUAL BYPASS FEEDING
The copier is equipped with a Manual Bypass Table on its right-hand side.
When using the manual bypass copying capability, the user inserts the copy
paper along the Paper Guide Plate at the front on the Table.
Transport Roller Sensor PC51 detects the paper inserted via the Manual
Bypass Table, which causes the copier to start the copy cycle. (No paper
size detection can, however, be made.)
*
Max. allowable paper length: 540 mm
Copier
Manual Bypass Table
Paper
Manual Bypass Table
Transport Roller Sensor PC51
Actuator
Transport Rollers
M-80
To Next Page
Loading...
