4
PRECAUTIONS FOR USE
To ensure that the copier is used in an optimum condition, observe the
following precautions.
●
Never place a heavy object on the copier or subject the copier to
shocks.
●
Insert the power plug all the way into the outlet.
●
Do not attempt to remove any panel or cover which is secured while the
copier is making copies.
●
Do not turn OFF the Power Switch while the copier is making copies.
●
Provide good ventilation when making a large number of copies
continuously.
●
Never use flammable sprays near the copier.
●
If the copier becomes inordinately hot or produces abnormal noise, turn
it OFF and unplug it.
●
Do not turn ON the Power Switch at the same time when you plug the
power cord into the outlet.
●
When unplugging the power cord, do not pull on the cord; hold the plug
and pull it out.
●
Do not bring any magnetized object near the copier.
●
Do not place a vase or vessel containing water on the copier.
●
Be sure to turn OFF the Power Switch at the end of the workday or
upon power failure.
●
Use care not to drop paper clips, staples, or other small pieces of metal
into the copier.
Operating Environment
The operating environmental requirements of the copier are as follows.
•
Temperature: 10°C to 30°C with a fluctuation of 10°C per hour
•
Humidity: 15% to 85% RH with a fluctuation of 20% RH per hour
Power Requirements
The power source voltage requirements are as follows.
•
Voltage Fluctuation: AC115/120/127/200/220/240V
±10% (Copying performance assured)
−15% (Paper feeding performance
assured)
•
Frequency Fluctuation: 50/60 Hz ±0.3%
G-6
To Next Page
Loading...
