17
PAPER TAKE-UP/FEED SECTION
The copier is equipped with two Paper Drawers, 1st and 2nd, that can be
slid to the front out of the copier. Each can hold up to 250 sheets of paper.
The 1st Drawer is a universal paper size type, while the 2nd Drawer is a
fixed paper size type.
Paper Empty Sensors
Paper Take-Up
Solenoids
1st Drawer Set
Detecting Switch
S65
Paper Size
Detecting Switches
2nd Drawer Set
Sensor PC69
Paper
Take-Up Rolls
Paper Take-Up Sensors
2nd Drawer
(Fixed Paper Size)
1st Drawer
(Universal Paper Size)
Paper Sizes That Can be Loaded
1st Drawer 2nd Drawer
Inch
Areas
8.5" × 11" [LETTER], 11" × 8.5"
[LETTER], 8.5" × 13" [G.LEGAL],
8.5" × 14" [LEGAL], 11" × 17"
8.5" × 11" [LETTER], 11" × 8.5"
[LETTER], 8.5" × 13" [G.LEGAL],
8.5" × 14" [LEGAL],
11" × 17", 5.5" × 8.5" [INVOICE],
8" × 10.5" [G.LETTER]
10.5" × 8" [G.LETTER], 8" × 13",
10" × 14", 11" × 14", 210 × 280,
280 × 210, 216 × 297, 216 × 320,
220 × 280, 220 × 330, 280 × 420,
210 × 330
Metric
Areas
A3T, B4T, A4T, A4Y, 8" × 13" A3T, B4T, A4T, A4Y, 8" × 13" A5T,
10" × 8" [QUARTO], 210 × 280,
216 × 297, 297 × 216, 216 × 320,
220 × 280, 297 × 430, 210 × 330
M-56