1. Open the Right Door.
2. Remove the Middle Right Cover. (4 screws)
(1) Adjustment of Front Door Interlock Switch S21
3. Remove the Upper Right Cover. (2 screws)
4. Remove the Right Cover. (2 screws)
5. Swing down the Front Door.
6. Remove the I/U Lock Lever. (1 screw)
7. Remove the Interlock Switch Cover. (2 screws)
8. Loosen the two screws that secure Front Door
Interlock Switch S21. Move S21 as far toward the front
side of the copier as it will go and temporarily secure it
in position.
9. Gently swing the Front Door closed and then tighten
the two S21 mounting screws to specification.
• The Switch is wired for the NO type.
D-46
To Next Page
Loading...
