Minolta EP1080 - Tech. Rep. Choice Mode

3. Tech. Rep. Choice Mode
•
This mode allows the Tech. Rep. to make various adjustments and settings, including copy
charge counter settings, according to the needs of the user.
Description of Each Choice Mode
Code
Choice Mode
Name
Description
Multi-
Copy
Key
Setting (
∗
: Initial Setting)
C0
Plug-In Counter
Counting Mode
Selects whether to count the
number of copy processes
carried out or the number of
sheets of paper used.
(Count-up type)
0
Counts the number of sheets
of paper fed out.
∗
1
Counts the number of copy
processes carried out.
C1
Paper Size
Counter Mode
Selects the size of paper to
be counted. (Count-up type)
For the constant and
conditions by which the count
is increased, see Table 1 on
p. S-11.
Inch Areas Metric Areas
0 No count No count
111" × 17"
∗
A3
∗
211" × 17",
8-1/2" × 14"
A3, B4
3
11" x 17", 11 x 14",
8-1/2" x 14"
A3, B4, FLS
C2
Total Counter
Mode
Sets the Total Counter to
count up the number of copy
processes carried out or the
number of sheets of paper fed
out. (Count-up type)
For the constant and
conditions by which the count
is increased, see Table 1 on
p. S-11.
0 1 count per 1 copy cycle.
∗
1 Multiple count-up according to
paper size and copy mode.
2 Multiple count-up according to
paper size and copy mode.
C4
Maintenance Call
Reminder
ON/OFF Mode
Selects whether to enable or
disable the maintenance call
reminder (IU Service Life
Indicator).
0 The maintenance call
reminder (IU Service Life
Indicator) not shown.
∗
1 The maintenance call
reminder (IU Service Life
Indicator) shown when
needed.
C5
PM Counter Mode Selects either the PM Counter
or Copy Kit Counter (and, in
the latter’s case, selects
whether to inhibit copying
after the Counter has counted
down to zero).
0PM Counter
∗
1 Copy Kit Counter (Copying
not inhibited after the Counter
has counted down to zero)
2 Copy Kit Counter (Copying
inhibited after the Counter has
counted down to zero)
C6
Plug-In Counter
Copying
Enable/Disable
Mode
Selects whether to enable or
disable copying regardless of
whether the Plug-In Counter
is plugged in or not.
0 Permits copying even when
the Plug-In Counter is not
plugged in.
∗
1 Inhibits copying when the
Plug-In Counter is not plugged
in.
S-8