Minolta EP1080 - Control Panel Keys and Indicators; Basic Panel

8
CONTROL PANEL KEYS AND INDICATORS
8-1. Basic Panel
Auto
S
Meter
Count
Toner
Drum
Dehumidify
Input
Auto
Size
Margin
Job
Memory
Cover
Manual
Staple
Sort
Sort &
Staple
Group
1
Mixed Orig. Det.
2
21
22
11
2in1
12
2in1
Book
1
Book
Orig. CopyFinishing
Auto
Lighter Darker
A
50%~200%
Auto
Full Size Paper
123
456
789
0C
Start
Stop
Energy Saving
Interrupt
Panel Reset
2
1139O5472A
A4
Full Size
A3
B4 A3
B4 A4
A3 A4
A3
A4
A4
B4
B5
FLS.
Inch
A5
6 7 8 9
1
2
3 4 5 18 17 16 15 14 13 10
12 11
19
1139O5472A
1
Clip Tray : A tray in which to put the paper clips used with
the documents.
2
System Panel : See "8-2. System Panel."
3
Exposure Control Key
(<, Lighter)
: Makes the exposure level lower in the Manual
Exposure Mode.
4
Auto Exposure Mode Key : Selects either the Auto or Manual Exposure
Mode.
5
Exposure Control Key
(>, Darker)
: Makes the exposure level higher in the Manual
Exposure Mode.
6
Zoom Down Key : Makes the zoom ratio smaller in 1% increments.
7
Zoom Up Key : Makes the zoom ratio larger in 1% increments.
8
Display Panel : See "8-3. Display Panel."
9
Multi-Copy Keys : Sets the number of copies to be made and
other numeric data including that for the Tech.
Rep. Program Mode and User’s Choice.
10
Panel Reset Key : Sets the copier into the initial mode, clearing all
settings made previously on the control panel.
(It does not, however, clear the contents of the
copying job program memory and the settings
immediately before an Interrupt Mode.)
Holding down the Key for 3 seconds will initiate
the User’s Choice.
11
Interrupt Key : Interrupts a current job with a more urgent one,
or restores the copier to the previous job.
12
Energy Saving Key : Sets the copier into the Energy Saving Mode.
13
Clear Key : Clears the number of copies, zoom ratio, and
other settings including those for the Tech.
Rep. Program Mode and User’s Choice.
14
Stop Key : Stops a multi-copy cycle; Used also in
combination with other keys to enter the Tech.
Rep Mode.
G-11