Minolta EP1080 - Edge Guide and Trailing Edge Stop

17-1. Edge Guide and Trailing Edge Stop
1st Drawer
The 1st Drawer is a universal type allowing the user to slide freely the Edge
Guide and Trailing Edge Stop (in 1 mm units) to accommodate paper of
different sizes.
The Edge Guide and Trailing Edge Stop can be locked into position by
meshing the notches in the Lock Lever with those in the Drawer.
Lock Lever
Drawer Side
2nd Drawer
The 2nd Drawer is a fixed paper size type, in which the Edge Guide and
Trailing Edge Stop are screwed into fixed positions.
The Edge Guide is provided with an Edge Pad (which is a Velcro) that
prevents double feed and ensures that the paper stack keeps its correct
alignment with regard to the paper path reference position.
(Trailing Edge Stop) (Edge Guide)
M-57