Minolta EP1080 - Page 271

*
Malfunctions for Other Options
Code Description Possible Cause
C0b10 Faulty Paper Clamp Unit
movement
•
Paper Clamp Motor M2
•
Paper Clamp Home Position Sensor PC6
C0b11 Faulty Paper Clamp Unit
movement
•
Paper Clamp Motor M2
•
Paper Clamp Home Position Sensor PC6
C0b30 Paper Aligning Motor
malfunction (Paper
Aligning Bar remaining at
home position)
•
Paper Aligning Motor M3
•
Paper Aligning Home Position Sensor PC5
C0b31 Paper Aligning Motor
malfunction (Paper
Aligning Bar not at home
position)
•
Paper Aligning Motor M3
•
Paper Aligning Home Position Sensor PC5
C0b50 Improper stapling action
(Stapler Arm remaining at
the home position)
•
Stapling Motor M4
•
Stapler Home Position Detecting Switch S4
C0b51 Improper stapling action
(Stapler Arm not at home
position)
•
Stapling Motor M4
•
Stapler Home Position Detecting Switch S4
C0b52 Improper stapling action
(stapling action occurring
with no staples driven into
the paper)
•
Paper Clamping Sensor PC8
C0b60 Faulty Bin movement
(Defective Bin Moving
Motor)
•
Bin Moving Motor M1
•
Bin Upper Limit Interlock Switch S1
•
Bin Lower Limit Interlock Switch S2
C0b61 Faulty Bin movement
(Defective drive)
•
Bin Moving Motor M1
C0b62 Faulty Bin movement
(Defective Bin Positioning
Sensor)
•
Bin Positioning Sensor PC3
C0b63 Faulty Bin movement
(Defective Bin Lower Limit
Position Sensor)
•
Bin Lower Limit Position Sensor PC4
C0b64 Faulty Bin movement (M1
speed detection failure)
•
Bin Moving Pulse Sensor PC1
ST-101
ST-101/S-104
T-39