Minolta EP1080 - Page 277

C004C
Step Check Item Result Action
1
Is M9 turning at low speed when the
Power Switch is in the ON position?
NO
Begin with step 3.
2
Does the voltage across PJ10A-4 on
PWB-A and GND change from DC12V
to DC24V when the Start Key is
pressed?
YES Replace M9.
NO
Replace PWB-A.
3
Is the voltage across PJ10A-4 on
PWB-A and GND DC12V when the
Power Switch is in the ON position?
YES Replace M9.
NO
Replace PWB-A.
C004E
Step Check Item Result Action
A
Does the voltage across PJ6A-9 on
PWB-A and GND change from DC0V
to DC24V when the Start Key is
pressed?
NO
Replace PWB-A.
B
Does the voltage across PJ6A-10 on
PWB-A and GND change from DC5V
to DC0V when the Start Key is
pressed?
YES Replace PWB-A.
NO
Replace M10.
T-45