Minolta EP1080 - Page 279

Step Check Item Result Action
1 Is C0071 being shown? YES Begin with step 3.
2
Does the Toner Bottle turn when two or
three copies are made with the Original
Cover raised?
YES Perform step 3.
NO
Perform step 4.
3
Make two or three copies with the
Original Cover raised. Does the
voltage across PJ2A-7 on PWB-A and
GND change to DC0V when the Toner
Bottle is stopped and to DC5V when
the Bottle is turned during the copy
cycle?
YES Replace PWB-A.
NO
Check the Bottle Holder or PC112.
4
Make two or three copies with the
Original Cover raised. Does the
voltage across PJ2A-10 on PWB-A
and GND change to DC0V when the
Toner Bottle is stopped and to DC24V
when the Bottle is turned during the
copy cycle?
YES Replace M8.
NO
Replace PWB-A.
T-47