5 Basic Navigation
For Mio Map to calculate a route, you need an origin (starting point) and a
destination (end point). Then, you can start your journey with Mio Map guiding
you along the roads.
NOTE: This chapter assumes that you are in the default Navigation and Vehicle mode. To
know how to use the other modes (Planner mode and Walker mode), see sections 6.5 and 6.1
respectively.
5.1 Selecting an Origin
By default, you origin is your GPS position.
5.2 Selecting a Destination
You can easily select a destination from any of the followings:
A known address, intersection, or zip code
A Point Of Interest (POI) from the list
A location in Favorites (personal stored locations)
An address in History (previous destinations)
A location on the map (with stylus taps)
Home (predefined location)
NOTE: If there are roads that you want Mio Map to avoid when calculating a route, use the
Avoid Roads function. (See section 6.2 for instructions.)
37
To Next Page
Loading...
