Divert Calls if No Reply
1 Select "No reply".
2 Select "Activate".
3 Enter number (maximum 24 digits) to divert to, or press the soft key to open the
phonebook.
4 Press "OK"
The handset sends a diversion reason code to the system by establishing a call. The code is
defined when configuring the diversion reason in the handset. For more information, refer to the
Configuration Manual for the handset; see Related Documents on page 127. The call is
automatically disconnected after a few seconds.
To stop diversion select "Deactivate" and press the confirmation button or the Soft key "OK".
Divert Calls When Busy
1 Select "When busy".
2 Select "Activate".
3 Enter number (maximum 24 digits) to divert to, or press the soft key to open the
phonebook.
4 Press "OK"
The handset sends a diversion reason code to the system by establishing a call. The code is
defined when configuring the diversion reason in the handset. For more information, refer to the
Configuration Manual for the handset; see Related Documents on page 127. The call is
automatically disconnected after a few seconds.
To stop diversion select "Deactivate" and press the confirmation button or the Soft key "OK".
SHORTCUTS
Predefined functions can be set as shortcuts for the Soft keys, Hot keys, Navigation keys and the
Multifunction button. For example, a soft key can be set to make a call, as a shortcut to send a
message or to a menu.
Tip: If creating a shortcut to the Phone call function, a variable or character U in the Enter
number field can be added that lets the user enter additional numerical characters before calling
the number. See Chapter 11 Procedure Call on page 101 for more information.
1 Enter the menu by pressing the “Menu” Soft key, or the confirmation button on the
Navigation key.
2 Select in the menu, and press the confirmation button or the Soft key "Select".
DEFINE SOFT KEYS
1 Select "Soft keys".
2 Select "Left", "Middle", or "Right".
3 Press "Select" to enter a name for the Soft key.
4 Press "OK".
5 Select "Function", and press "Select" to select function for the Soft key.
6 Select function from list, and press "Back".
To Next Page
Loading...
