• A long press on the "0" key adds a "+" to the number.
• Enter a pause in number input mode by a long press on the # -key. A pause is indicated
by a "P" in the display.
• A long press on the * - key changes the tone sender on.
Tone sender on is indicated by a "T" in the display.
In text input mode
• A short press on a key 0-9, displays the first available character on that specific key. The
marked character is selected after a timeout, or when another key is pressed.
• To change to upper or lower case, press the * -key before entering the character.
The *-key can also be used to display only the digits.
• To add space in the text, make a short press on key 0.
• The first character entered in a message, or when adding or editing a name in the Contacts
menu, is an upper level character followed by lower level characters, unless the * -key is
pressed before entering the character. To switch between Abc, ABC, abc, and 123 the *-key
is pressed.
• A long press on the #-key displays special characters.
• A long press on the *-key opens a menu to change writing language (Default follows the
menu language setting).
ACCESSORIES
BELT CLIPS
• Hinge-type clip
The clip on the back of the handset is used to fasten the handset to a belt or similar. The
clip can also be changed to a swivel-type.
SECURITY CORD
The security cord is 800 mm long. The security cord is attached directly to the handset.
CARRYING CASE
The carrying case is especially designed for the handset. The carrying case comes with a swivel
type belt clip and the handset is fully operational while placed in the carrying case.
HEADSET
A headset is recommended if the handset is frequently used or the user want to have both
hands free. The headset comes in three versions; microphone integrated in the cable,
microphone on a boom and hearing protection.
Note: The handset can also be used without any clip on, see Attach Cover for No Clip
on page 124.
To Next Page
Loading...
