SERVICES
The Services menu lets the user create a submenu of frequently used functions. For example,
"Write new message", "Central phonebook", "Call contact", etc.
Tip: If configuring the Phone call function, a variable or character U in the Enter number field
can be added that lets the user enter additional numerical characters before calling the number.
See Chapter 11 Procedure Call on page 101 for more information.
1 Enter the menu by pressing the “Menu” Soft key, or the confirmation button on the
Navigation key.
2 Select in the menu, and press the confirmation button or the Soft key "Select".
ADD SERVICES
1 Select "Add new" from the "Services" menu.
2 Choose an appropriate name for the service and enter the name in the "Name" field.
3 Press "OK". The "Function" menu is displayed.
4 To navigate to the required function, press up and down on the navigation key.
5 Press "Select" or the confirmation button on the navigation key.
6 If necessary
, enter values in the fields (only applicable for some of the functions)
7 Press "Back".
EDIT SERVICES
1 Mark a service by pressing up and down on the navigation key.
2 Press "More"
3 Select "Edit".
4 Edit the service parameters.
5 Press "Back"
DELETE SERVICES
1 Mark a service by pressing up and down on the navigation key.
2 Press "More".
3 Mark "Delete" by pressing down on the navigation key.
4 Press "Select".
5 Press "Yes" to delete the service.
MESSAGING
Tip: To close several new messages quickly, press . The messages are indicated as unread
messages in the Messaging inbox.
The thirty last received messages are stored in the inbox. Time and date information is included in
the message.
If a message is received when the inbox already contains thirty messages, the message in the
inbox with the oldest time and date is automatically replaced by the newly received message.
To Next Page
Loading...
