Mitel 5614 DECT Phone User Manual for MiVB
page 124. Use the clip to attach the handset to a pocket, belt, or similar. The handset can also
be without any clip, see Attach Cover for No Clip on page 124.
Battery
The battery is a rechargeable Li-pol battery, placed under a battery cover. See Replace the
Battery on page 120.
The battery is fully charged within four hours. See Charge the Battery on page 120.
The battery can be charged separately with a special battery charger. See Charge Spare Batteries
on page 120
CHARGERS
DC3 DESKTOP CHARGER AND DP1 DESKTOP PROGRAMMER
Figure 2: DC3 Desktop Charger and DP1 Desktop Programmer.
The DC3 Desktop Charger will only charge the handset, while the DP1 Desktop Programmer
will download new software and synchronize parameters. The handset is fully operational while
placed in the charger.
The DC3 Desktop Charger is delivered with a plug-in power supply and is connected into an
ordinary wall socket.
CR3 CHARGING RACK
The CR3 Charging Rack is used for charging several handsets, to synchronize parameters,
and for software download.
The built in power supply can charge up to six handsets.
BATTERY PACK CHARGER
The Battery pack charger is used for charging up to six spare batteries.
Note: Only use the charger within the temperature range of +5° C – +40° C.
To Next Page
Loading...
