Mitel 5614 DECT Phone User Manual for MiVB
LOCK AND UNLOCK THE HANDSET
The handset can be locked to prevent unauthorized use. If this function is activated, a PIN code
has to be entered for example to switch on the handset, to answer an incoming call etc. The
default phone lock code (0000) can be changed to any 4 - 8 digit personalized code.
1. Enter the “Settings” menu.
2. Select “Locks”
3. Select “Phone lock”.
4. Select "Auto phone lock".
5. Select "On", "On in charger", or "Off".
MUTE HANDSET ON INCOMING CALL OR MESSAGE
The handset can be muted temporarily on an incoming call or message. The call is not hung
up when the handset is muted. If the call is unanswered, it reverts to voicemail if the handset
has been configured for voicemail.
To mute an incoming call or message, press or while the handset sounds.
Note: When the keypad is Iocked, the volume buttons and the mute button can be pressed during
the call. Depending on what model of handset that is used, the Alarm button can also be pressed.
For information about what functions that are supported by existing handset models, see
Functions and Accessories on page 3.
Notes:
• If a phone is shared and one of the users logs off the shared phone, the lock that
prevents the handset from unauthorized use is deactivated. For additional informa-
tion, see Log a Shared Phone On and Off on page 30.
• The handset can be configured with predefined emergency numbers that can be
called while the handset is locked. Refer to the Configuration Manual for the handset;
see Related Documents on page 127. Depending on model of handset, the Alarm
button can also be used. For information about what functions that are supported
by existing handset models, see Functions and Accessories on page 3.
To Next Page
Loading...
