IN CALL
The In Call menu displays a list of functions that can be accessed during a call. To refer to the
available functions, press the "More" soft key. Some functions are always provided and others
may be made available by the administrator via the WinPDM/Device manager. To use a function,
navigate the In Call menu to highlight the required function and then press the “Select” soft key.
The In call function can be used in combination with the Procedure call function, see Chapter 11
Procedure Call on page 101.
ADDITIONAL IN CALL FUNCTIONS
Besides the default In Call functions, up to 10 extra system specific codes or general purposes
can be defined. Refer to the Configuration Manual for the handset; see Related Documents on
page 127.
Note: When calling from a locked handset, there are limitations to what items in the In
Call menu are shown. However, the entire menu is accessible when calling from a
handset with unlocked keypad.
• Call back
• DECT info
• Audio transfer
• End call
• Call waiting
• Switch
• Transfer
• Transfer to new call
>
• New call
>
>
• Conference
—>
>
>
>
• “Phonebook access”
• Call
—>
• Cancel
• “Phonebook access”
• Call
• Cancel
• Contacts
• Microphone on/o
• DTMF
>
>
>
• General purpose 1 -10
>
—>
• System
• Link
• Messaging
• Write new message
• Inbox
—>
• Unsent
• Sent
• DECT Location info
• Location info
—>
To Next Page
Loading...
